#REMOVING TREX HIDDEN FASTENERS HOW TO#

Then, use a pry bar to remove the board from the deck.Ħ. Cut through the board until it is completely severed. Be careful not to cut into the underlying support structure of the deck.ĥ. When you’re ready to start cutting, insert the blade of the Sawzall into the space between the decking boards. This will help you avoid cutting into the wrong board.Ĥ. Before you start cutting, you should mark the location of the board you want to remove with a pencil. A Sawzall is a power saw with a long, thin blade that can be inserted into tight spaces.ģ. If you need to remove a board from your Trex deck, the best way to do it without damaging the decking is to use a Sawzall. However, like any other material, it can be damaged.Ģ. It is a popular choice for decks because it is durable and resists rot and decay. Trex decking is a composite material made of wood fibers and plastic.

#REMOVING TREX HIDDEN FASTENERS HOW TO#

Here we have given some tips on how to remove trex deck boards without damageġ.

But if you use one of these methods, you’ll be able to get the job done without any trouble. Removing a deck board without damaging it can be a tricky task. Just be careful not to damage the joists as you remove the screws. This will make it easier to remove the remaining boards. Once the first board is removed, you can then remove all of the screws from the joists. As you do this, be sure to support the board so that it doesn’t break. Start at one end of the board and use a pry bar to gently lift the board up. Now that you’ve loosened the fastener, it’s time to remove the decking. Be careful not to touch the blade to the railing or any other part of the deck while you’re cutting. Next, set the blade depth to the thickness of the deck board. First, mark where you want to cut the board. If you have a circular saw, you can use it to cut the deck boards. Be careful not to damage the joists or other boards while removing the screws. Then, use a screwdriver or pry bar to remove the nails or screws. Use a Drillĭrill a hole through the board at each end. Be careful not to damage the surrounding boards.

Start by heating up the area around the nails or screws that are holding the board in place. If the deck board is tightly attached and you cannot pry it up or cut it, you may be able to use a heat gun to loosen it. Be careful not to damage the decking surface when doing this. Once the nails are loosened, you can then pull the board up and away from the deck. The leverage will help to loosen the nails holding the board in place. Start by placing the pry bar at the end of the deck board and gently pushing it down. You can also use a pry bar or other levering device to remove the deck boards. Be careful not to damage the boards as you remove them.

Start at one end and work your way to the other. Then, use the hammer to pry the board up gently. First, use the screwdriver to loosen any nails or screws that are holding the board in place. If the deck board is tightly attached, you can use a hammer and screwdriver to pry it up. Be sure to use a chisel the same width as the deck board and take your time so you don’t damage the surrounding boards. This can be helpful if the boards are tightly attached or if there is a lot of debris between the boards and the joists. Use a ChiselĪnother option for removing deck boards is to use a chisel. Just be sure to use a sharp blade and cut through the board evenly to avoid damaging it. This can be done with a Sawzall, circular saw, or even a handsaw. If you cannot pry the deck board up, you may need to cut it to remove it. You can use a pry bar, crowbar, or even a screwdriver. This will help avoid putting too much pressure on any particular area and potentially cracking or splitting the board. The easiest way to remove a deck board without damaging it is to pry it off at an angle.

10 Ways on How to Remove Trex Deck Boards Without Damage 1. Next, use the hammer to lightly tap the board in the marked spot. First, mark the location of the boards with a pencil. Summary: If you’re having trouble removing the trex deck boards without damaging them, try using a pneumatic hammer. In this blog post, we’ll show you step-by-step how to remove trex deck boards without damage, so you can get your deck ready for a fresh start. Luckily, you can use a few tricks to make the process easier and ensure that your deck boards come off without a hitch. Removing Trex deck boards can be tricky, especially if you want to avoid damaging the boards.

Removing trex hidden fasteners